DOWNLOAD LS-LGL FIRMWARE

The resulting window will pop up:. Reboot your PC in to safe mode with networking. Turn the LinkStation on with holding down the function button. If the Nas Navigator finds the unit but the unit is at an IP other than If the Nas Navigator cannot find the unit hold the reset button on the unit for 10 seconds and give it minutes to reset. The reset button is on the back of the Linkstations and is behind the door underneath the LCD screen on the TeraStations.

Uploader:	Dum
Date Added:	9 March 2010
File Size:	52.8 Mb
Operating Systems:	Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads:	9982
Price:	Free* [*Free Regsitration Required]

Move the power switch to the on position while holding down the function button.

Linkstation client utility | Buffalo Technology LinkStation LS-LGL User Manual | Page 14 / 19

If you choose not to initialize the admin password from the function button, you can no longer configure the LinkStation if you forget the password! You should see text closely resembling the following: Press the function button again while the LED is flashing. The resulting window will pop up: In the target line you will see: The function LED will flash white.

Open the tsupdater or lsupdater file with the following icon next to it some variations may occur: Run the shortcut and choose update. Turn off the LinkStation. Was this answer helpful?

Perform regular steps to continue flashing firmware. Open up the tsupdater. The reset button is on lz-lgl back of the Linkstations and is behind the door underneath the LCD screen on the TeraStations. If it does not work then please try this.

To reset the password for the LinkStation, initialize the LinkStation to its factory default with the function button.

A default gateway is not required nor is DNS. Extract the files on to your desktop 5. This initialize the LinkStation password and IP address to its factory defaults.

XP Icon Vista Icon 4.

The LinkStation will be restored to its factory default settings. All settings are restored to their factory defaults.

You can do this by logging in to the web interface, choosing maintenance, initialization and choose restore does not delete data or shares.

Linkstation client utility – Buffalo Technology LinkStation LS-LGL User Manual

Write your password down and put it in a safe place. Apple Computers or Linux computers cannot perform this operation in the firmware updater.

Try resetting your unit by holding down the reset button 1. Move the power switch to the off position to shut down the LinkStation.

If the Nas Navigator cannot find the unit, make sure to change out the Ethernet cable, make sure the Ethernet port on your Pc is enabled, try another Ethernet port or try a different computer.

Force Update Buffalo Linkstation NAS

If you feel that this is not necessary you can try skipping this step. The resulting window will pop up:. If having issues follow this to remove unit from the network. If the Nas Navigator cannot find the unit hold the reset button on the unit for 10 seconds and give it minutes to reset.

This starts the initialization process. The following settings will be initialized: The status LED will flash amber during initialization. It might take minutes.